Founded in 1991, we produce fiberglass fiberglass Antislip Sheet and Anti-skid Panel. It has been widely applied in the areas of refrigerated compartment inside and outside plate, Recreational Vehicle / caravan inside and outside plate, blood collection vehicle / body examination car inside plate, container inside and outside board, frozen warehouse inside and outside plate, yacht production, insurance cabinet, wall decoration, etc. We are top 10 of this industry in China and many of our customers are world’s top 500 enterprises, such as TOSHIBA, HINO, ANDREW, etc. The size, color, thickness, pattern are all customized.
1. Designing the type of fiberglass sheets
Dongguan MIYABI-fiberglass Limited has over two hundred fiberglass corrugated plates, these fiberglass products almost include and match all color steel pressure plates. MIYABI can also customize special types of fiberglass according to your own design, and you just need to provide the sectional drawing of fiberglass profile. Custom fiberglass panels are available.
2. Designing the spacing between purlines
Fiberglass sheets are mainly used for lighting belt on roof. The distance between the purlines depends on color steel pressure plates, the pressure of the wind it bears and snow load parameters. fiberglass sheets which fiberglass thickness is within 1.0mm are only suitable for nursery garden daylighting plate, greenhouse daylighting plate or double layer daylighting floor. 1.2mm thick fiberglass sheets are suitable for color plate within 0.476mm. 1.5mm thick fiberglass sheets are suitable for color plate within 0.476-0.6mm. .03mm thick fiberglass sheets are suitable for buildings with huge distance between purlines.
3. Designing Daylighting rate of fiberglass sheets
Taking 65% light transmittance fiberglass sheeting as example. Considering geographical factors, we suggest choosing 11% daylighting rate in Southern China, and choosing 15% daylighting rate in Southwest and Northeast of China. Suitable daylighting rate can increase the soft and comfort degree of sunlight. According to the uses of plant and industrial characteristics, we can choose the daylighting rate between 8%-18%. (Attention: excessive daylighting rate can cause overheating indoors during the summer. )
4. Designing the distribution of fiberglass sheets
Putting daylighting fiberglass panels from ridge to cornice.
Or covering daylighting fiberglass panels from ridge to the middle of top panel.
5. Design parameter of fiberglass sheets
MIYABI had multiple tests on physical performance parameters of FRP daylighting plate. Common data is as follows. Bending strength is 110MPa. Fiberglass tensile strength is 84MPa. Impact strength is 98MPa. Coefficient of thermal expansion is 2.2 x10-5CM/CM/℃. In coastal areas with strong typhoons, there are something frequently happen that typhoons lift roof panels. We propose to increase the purline density in the eaves and outside the ridge(The distance is ideally less than or equal to 750mm). This is also applicable for color coated panels. And while designing it, we should consider the phenomenon of water capillarity on the roof under the effect of wind pressure.
CONTACT US
E-mail：[email protected]
If you are interested in any of fiberglass products, please contact me by email and we will be happy to quote our lowest price as soon as we receive your detailed request.
